Ford Bronco Grab Handles — Paracord, Roll Bar, and Headrest Options

The Ford Bronco's open-air design is exactly why grab handles matter. Whether you're running the doors off on a trail run, scrambling over loose rock, or just handing a passenger something to hold onto on a forest road, a good set of Bronco grab handles makes the ride safer and more comfortable for everyone inside the cab.

Bartact invented the paracord roll bar grab handle — and now we build them specifically for the 6th generation Ford Bronco (2021–2026). Bolt-on installation, no drilling, made in the USA.

Ford Bronco Grab Handle Options from Bartact

Paracord Roll Bar Grab Handles

Bartact's paracord grab handles for the Ford Bronco wrap the roll bar in durable paracord for a grippy, trail-ready handle that looks like it came from the factory — if the factory cared about off-road utility. The paracord construction gives your passengers something substantial to grab during technical terrain, and the installation is clean with no exposed hardware.

Available for both 2-door and 4-door Bronco configurations. The 4-door adds rear passenger grab points that the stock interior doesn't offer.

Plastic Roll Bar Grab Handles

Bartact also offers injection-molded plastic grip grab handles for the Bronco — a lighter, lower-profile option for Bronco owners who prefer a cleaner look. Same bolt-on install, same fitment to the 2021–2026 roll bar structure.

Headrest Grab Handles

For vehicles with removable headrests, Bartact's headrest grab handles loop onto the headrest posts and give rear passengers a grab point without touching the roll bar. A practical solution for Bronco owners who want grab handles front and rear without additional hardware.

Why the Ford Bronco Specifically Needs Grab Handles

The Bronco is designed to go places. And when you go places — real places, off pavement — the ride gets rough. Stock Bronco interiors offer minimal grab points for passengers, especially in the rear of the 4-door. Without something to hold onto, passengers brace against the dash or grab each other, which is both uncomfortable and distracting to the driver.

A proper set of grab handles solves this. Bartact's Bronco grab handles give every passenger a dedicated, secure grip that's exactly where they need it, bolted to the roll bar structure rather than clamped onto something that might give way.

Installation: Bolt-On, No Drilling

Bartact Bronco grab handles mount to existing roll bar hardware — no drilling, no cutting, no modifications to your Bronco's structure. The install takes about 15 minutes with basic hand tools. The fit is tight enough that the handles won't rattle on the trail, and the mounting hardware is concealed inside the wrap for a clean look.

Compatibility

• 2021 Ford Bronco (2-door and 4-door)
• 2022 Ford Bronco (2-door and 4-door)
• 2023 Ford Bronco (2-door and 4-door)
• 2024 Ford Bronco (2-door and 4-door)
• 2025 Ford Bronco (2-door and 4-door)
• 2026 Ford Bronco (2-door and 4-door)

Compatible with Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Heritage, and Raptor trims. Confirm your configuration (2-door vs. 4-door) when ordering — roll bar structure differs between the two.

Paracord Options

Bartact's paracord grab handles are available in a range of paracord colors, so you can match your Bronco's interior or run a contrasting color for visibility. Standard colors include black, tan, olive drab, and coyote brown, with additional options available depending on current inventory.

All paracord is 550 paracord — 550 lb tensile strength, 7-strand construction, UV-resistant. The same spec used by the military. Not craft store cord dressed up as trail gear.

Complete Your Bronco Interior with Bartact

Grab handles are one piece of a complete Bartact Bronco interior setup. If you're building out your Bronco for serious trail use, also look at:

• Ford Bronco seat covers — custom-fit for 2021–2026, MOLLE-compatible, SRS airbag safe
• Ford Bronco accessories — MOLLE panels, console organizers, storage bags
• MOLLE accessories — pouches and panels that attach to Bartact MOLLE-equipped products
• Fire extinguisher holders — MOLLE-compatible mounts for trail safety

Everything Bartact makes for the Bronco is built in the USA at Bartact's American facility, to the same standard as everything else we make. Shop the full Bartact grab handle collection.