Fire Extinguisher Roll Bar Mount
Bartact roll bar fire extinguisher mounts for Jeep Wrangler, Jeep Gladiator, Ford Bronco, UTVs, and any vehicle with roll bars. First Alert compatible. Bolt-on. No drilling. Made in the USA.
Roll bar mounting is the correct location for a trail fire extinguisher — accessible to both occupants within seconds, in plain sight, not buried in gear. Bartact mounts use existing roll bar hardware. No drilling into the roll bar. No permanent modification. Off and on in minutes.
Compatible Vehicles
- Jeep Wrangler JL & JLU (2018–2026)
- Jeep Wrangler JK & JKU (2007–2018)
- Jeep Wrangler TJ & LJ (1997–2006)
- Jeep Gladiator JT (2019–2026)
- Ford Bronco (2021–2026) — 2-door and 4-door
- UTVs & side-by-sides — Polaris RZR, Can-Am, Yamaha, and any UTV with accessible roll cage mounting points
- Rock crawlers & custom builds — any vehicle with a roll bar and accessible mounting hardware
Compatible Extinguisher
First Alert only. ABC-rated — Class A (combustibles), Class B (fuel/flammable liquids), Class C (electrical). Available as a combo from Bartact. Do not use Halotron (Amerex) or Element extinguishers in this mount.
Materials & Construction
High-strength construction. Bar Tack stitching at all load points. Corrosion-resistant hardware for open-air, wet-weather, off-road use. Made in the USA. Bartact holds active US military production contracts.
Complete Your Safety Setup
Pair with Bartact paracord grab handles — 550 paracord, hand-wrapped in the USA. Seat covers — custom-fit, made in the USA. MOLLE panels. All made in the USA by Bartact.
Bartact — USA-Made Off-Road Accessories
Bartact designs and manufactures off-road accessories for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Toyota 4Runner, Toyota Tacoma, and UTV platforms. Every product leaves the Bartact facility having been made in the United States — from materials specified for off-road conditions to construction standards that match and exceed what the trail demands. The Bartact product lineup covers the interior protection and functional accessory needs that serious off-road use creates: seat covers that withstand UV exposure and moisture intrusion during topless driving, paracord grab handles that provide genuine grip and emergency cordage from factory mounting positions, MOLLE organization panels that convert flat interior surfaces into accessible gear storage, and fire extinguisher holders that keep safety equipment within arm's reach without consuming floor space.
Why Materials Matter in Off-Road Accessories
Off-road accessories face conditions that consumer products from standard retail channels were not designed to survive long-term. A Jeep Wrangler running topless through a full summer exposes every interior surface to sustained UV radiation that fades standard fabrics in one season. A water crossing that puts six inches of water on the floor soaks through standard seat materials and promotes mold in the foam underneath. Trail debris entering through open doors and a removed top introduces abrasion and contamination that standard upholstery absorbs permanently. Bartact addresses each of these conditions directly with material choices that are appropriate to the environment: UV inhibitors built into the 600D polyester fiber during manufacturing so the protection is permanent rather than applied as a surface coating, waterproof backing that keeps moisture on the surface where it wipes clean, and Bar Tack stitching at all stress points that extends seam life beyond what standard flat stitching can provide under repeated load. For military and specialty colors, mil-spec 1000D Cordura nylon provides the highest level of abrasion resistance available in consumer goods — the same material used in US military load-bearing equipment.
Bartact's Origin in the Jeep Market
Bartact's reputation was built in the Jeep Wrangler market, where the product demands of a topless, doors-off, trail-capable vehicle forced Bartact to develop materials and construction techniques that simply did not exist in the standard automotive accessories market. The paracord grab handle — a product Bartact invented and brought to market — is now the most widely copied grab handle design in the Jeep accessory market. The custom-cut seat cover approach — where covers are patterned from precise measurements of actual Jeep seats rather than stretched to approximate fit — established a quality baseline that other manufacturers in the category have had to respond to. The consistent three-year anti-fade guarantee on standard colors backed by fiber-built UV protection created a credibility standard that generic alternatives without the material backing cannot match. These standards that Bartact developed for the Jeep market have been applied consistently as the product lineup expanded to other platforms — the Bronco, the 4Runner, the Tacoma, and UTV platforms all receive the same material specifications and construction standards as the Wrangler products that built the brand.
Installation and Fit
Bartact accessories are designed to install without drilling, welding, or permanent modification to the vehicle in every category where factory hardware positions allow this approach. Paracord grab handles bolt to factory roll bar mounting holes that are already threaded and waiting for hardware. Fire extinguisher holders clamp to roll bar tubing using the same hardware positions. MOLLE panels attach to existing seat back and interior anchor points. Seat covers use vehicle-specific attachment systems matched to the seat architecture of each platform rather than generic elastic straps that shift during use. The combination of precise custom-cut patterns and vehicle-specific attachment hardware produces an installation that looks intentional and stays in position through hard use without requiring adjustment or repositioning after every drive.
Complete Your Bartact Build
Every product in the Bartact catalog is designed to work as part of a complete interior system rather than as a standalone accessory. Seat covers protect the foundation of the interior. Paracord grab handles provide functional passenger grip and emergency cordage from roll bar positions. MOLLE accessories add organized gear storage throughout the cab without drilling or permanent modification. Fire extinguisher holders position safety equipment within arm's reach of both front occupants. Winch covers protect recovery hardware between trail uses. Spare tire cargo bags expand storage capacity using the rear carrier frame. Tailgate MOLLE panels and seat back panels round out the organized interior. Every product is made in the USA from consistent material standards and backed by Bartact's commitment to domestic manufacturing quality.
Frequently Asked Questions
Where are Bartact products made? Every Bartact product is manufactured in the United States.
What is the anti-fade guarantee? Bartact backs standard color seat covers, MOLLE panels, and most fabric accessories with a three-year anti-fade guarantee. This is supported by UV inhibitors built into the 600D polyester fiber during manufacturing — the protection does not degrade over time because it is a property of the material, not a surface coating.
Do Bartact accessories require drilling to install? No drilling required on Jeep Wrangler, Gladiator, and Bronco platforms for grab handles, fire extinguisher holders, and most MOLLE accessories. Factory hardware positions are used throughout. UTV accessories use roll cage clamp hardware that does not require drilling.
Are MOLLE pouches from other brands compatible with Bartact panels? Yes. Bartact uses standard MOLLE webbing specification — 1-inch strips at 1.5-inch spacing. Any MOLLE-compliant pouch from any manufacturer attaches directly to Bartact panels.
What Makes Bartact Different From Every Other Brand
The Bartact difference comes down to three decisions that most accessory manufacturers never make: manufacture in the USA, build UV protection into the fiber rather than coat it on the surface, and cut every product to the exact dimensions of the specific vehicle it is designed for rather than producing a universal shape that approximates fit across dozens of applications.
Domestic manufacturing is a quality control decision first and a values statement second. When Bartact manufactures in the USA, the entire production process — material sourcing, cutting, sewing, Bar Tack reinforcement, quality inspection — happens under conditions that Bartact can directly monitor and control. The result is consistent product quality across every unit that leaves the facility, not the variable quality that results from remote offshore production where specifications get interpreted rather than enforced. Every Bartact product is hand-sewn by skilled workers in Temecula, California. That is not a marketing claim — it is the operational reality that makes the quality consistency possible.
Fiber-built UV protection is the material science decision that makes the three-year anti-fade guarantee credible. UV inhibitors applied as a surface coating to finished fabric are a temporary solution — they degrade with UV exposure, wash out with cleaning, and fail first at fold lines and abrasion points where the coating gets compromised. UV inhibitors built into the polyester fiber during the fiber manufacturing process are a permanent property of the material. They do not degrade with UV exposure because they are not a surface treatment. They do not wash out because they are part of the fiber structure. The result is a fabric that maintains its color fidelity under sustained UV exposure in the same way the fiber's other permanent properties — strength, flexibility, water resistance — are maintained under sustained use. Bartact 600D Patriot Polyester uses this approach. The three-year anti-fade guarantee is the consumer-facing expression of the material reality.
Custom-cut fitment is the design decision that separates Bartact from the category of products sold as universal fits. A universal seat cover is a compromise — it is designed to approximately fit the most common seat shapes while being marketed across dozens of incompatible seat geometries. The result is a cover that bunches at the bolsters, has headrest sleeves at the wrong height, and uses elastic attachment straps running at angles incompatible with the seat's actual anchor point locations. On a Jeep Wrangler, where the seat geometry is unique to the platform and where the cover gets exposed to the most demanding use conditions, a universal cover fails faster and looks worse from day one. Bartact patterns every product from precise measurements of the actual vehicle seat it is designed for. The custom-cut approach costs more to produce and requires maintaining a larger SKU library, but the result is a product that installs cleanly, stays in position through hard trail use, and looks like it was designed for the vehicle rather than forced onto it.
The Bar Tack Difference
Bar Tack stitching is the construction technique that reinforces high-stress points in Bartact products. A Bar Tack is a series of dense, perpendicular stitches concentrated at a single stress point — attachment loops, pocket openings, strap anchors — that distributes load across a broad area of fabric rather than concentrating it at a single thread. Standard flat stitching fails at stress points under repeated load because the load concentrates at the last stitch in the run. Bar Tack stitching distributes that load across dozens of stitches simultaneously, which is why the technique is used in parachute harnesses, climbing equipment, and military load-bearing gear where stitch failure has consequences. Bartact applies Bar Tack stitching at every stress point in every product — not as an upgrade option, but as the standard construction method. This is one of the specific decisions that makes Bartact products last significantly longer than alternatives that use flat stitching throughout.
Browse the Full Bartact Lineup
Every product in the Bartact catalog is built to these standards. Seat covers for Jeep Wrangler TJ, JK, and JL, Jeep Gladiator, Ford Bronco, Toyota 4Runner, and Toyota Tacoma — all custom-cut, all USA-made. Paracord grab handles invented by Bartact, handmade in the USA with Type III 550 paracord. MOLLE accessories — seat back panels, tailgate panels, and mounting solutions for organized interior gear storage. Fire extinguisher holders for roll bar safety equipment mounting with no drilling required on Jeep platforms. Winch covers for recovery hardware protection between trail uses. Spare tire cargo bags that convert the carrier frame into usable storage. Every Bartact product is backed by the same domestic manufacturing commitment and material standards that have built the brand's reputation in the Jeep community.
