Suspension Limit Strap 4 Layer Quad Wrap with 4130 Chromoly Heat Treated End Pieces - Made in USA Bull Strap by Bartact
If you have any question or need help placing an order, Mitch, Matt or Sal will be glad to take your call at Phone: 951-319-4008.
Bull Strap 4 Layer Quad Wrap Suspension Limit Strap with 4130 Chromoly Heat Treated End Pieces - Made in USA by Bartact
Race Proven by best in class off-road racers for over 14 years! At Bartact & Bull Strap, we use only Heat-Treated 4130 Chromoly End pieces and 100% Made in USA Mil-Spec Resin Treated 7,000 LB Nylon webbing in a full quad wrap configuration, so you have 2 full layers around each buckle.
We DON'T SKIMP on quality...EVER! Made from 4 Layers of 7,000 LB webbing (28,000 lb strength total, but load limit due to thread stress is approximately 14,500 breaking strength) with heavy duty enamel-coated Heat-Treated 4130 Chromoly hardware, and high grade nylon thread, Bull Strap Limit Straps are made to last and to hold up much better than flimsy single or sound layer straps with hardware not even half the strength. BEWARE! Other Made in China straps have copied our stamp with the '4130 Heat Treated', but those end pieces break at roughly 5,500 lbs. Ours buckles are rated for over 12,500 lbs, but consistently hold up to over 15,000 lbs in testing before breaking.
*Available in multiple lengths for your desired application
*4 layers of 7,000 LB 1-3/4" Made in USA Mil-Spec, Resin-Coated, Twisted Yarn Nylon Webbing - 4 Layers!!!
*12,500 LB Enamel Coated Heat-Treated 4130 Chromoly End Pieces with protective deflector sleeve and 9/19" Bolt Hole
*High quality thread and stitching
*Made in USA
Bull Strap (a division of Bartact) Straps, Ropes, Bags, & Tie Downs are the highest quality & top-of-the-line in the off-road industry and are proudly Made in the USA.
We make sure to use top-rated hardware and webbing, and refuse to use the 'cheap stuff'...So you can say goodbye to your cheap limit straps and upgrade to ours.
*WHEN ORDERING, LENGTH OF STRAP IS DISTANCE BETWEEN CENTER OF HOLE TO CENTER OF HOLE. NYLON IS MEANT TO STRETCH SLIGHTLY TO KEEP A SMOOTHER TRANSITION. STRAP STRETCH DEPENDS ON MULTIPLE VARIABLES, INCLUDING WEIGHT, WET CONDITIONS, ETC, BUT ON MOST APPLICATIONS, YOU SHOULD FACTOR ROUGHLY AN INCH OF STRETCH FOR EVERY FOOT OF STRAP.
***Bull Strap & Bartact are both Registered Trademarks under Trek Armor Inc.
We Also Recommend
MOLLE Strap 1" Adjustable Bull Wrap Utility Strap w/ Hook & Loop, PALS / MOLLE Compatible - Tie (Pair of 2), Bull Strap by Bartact
Ratchet Tie Down Straps w/ S-Hooks (QTY 4) w/ FREE Recovery Bag, Bull Strap 1" x 12' Medium Duty
Ratchet Tie Down Straps w/ Twist Snap Hooks & Adj Axle Strap Combo Heavy Duty (Pair of 4) w/ 4 FREE Bull Wraps, Bull Strap 2" x 12' 10,000 LB